Effect of foam on temperature prediction and heat recovery potential
from biological wastewater treatment

Effect of foam on temperature prediction and heat recovery potential from biological wastewater treatment

Lưu vào:

Hiển thị chi tiết
Tác giả chính:	Robles,L. Corbala-
Định dạng:	text
Ngôn ngữ:	vie
Chủ đề:	Foam Heat balance
Truy cập trực tuyến:	https://thuvien.huce.edu.vn/Opac/DmdInfo.aspx?dmd_id=29829
Từ khóa:	Thêm từ khóa bạn đọc Không có từ khóa, Hãy là người đầu tiên gắn từ khóa cho biểu ghi này!

Tài liệu tương tự

Analysing wastewater temperature development in a sewer system as a basis for the evaluation of wastewater heat recovery potentials
Thông tin tác giả:: Kretschmer,Florian

Polymeric foams for cryogenic temperature application: Temperature range for non-recovery and brittle-fracture of microstructure /Seong-Bo Park a , Chi-Seung Lee a , Sung-Woong Choi b , Jeong-Hyeon Kim a , Chang-Seon Bang c , Jae-Myung Lee a, ⇑
Thông tin tác giả:: Park,Seong-Bo

Effect of activated foaming agent on the foam concrete properties
Thông tin tác giả:: Kuzielová,Eva

Acoustic behavior prediction of monodisperse foams using polynomial surrogates
Thông tin tác giả:: Van Hai Trinh

Properties of foamed concrete containing water repellents
Thông tin tác giả:: Ma, Cong

Utilization of original phosphogypsum for the preparation of foam concrete
Thông tin tác giả:: Tian,Tian

A microwave foaming method for fabricating glass ﬁber reinforced phenolic foam /Jaeheon Choe, Minkook Kim, Jinwhan Kim, Dai Gil Lee ⇑
Thông tin tác giả:: Choe,Jaeheon

Fabrication of adiabatic foam by sodium silicate with glass ﬁber as supporting body
Thông tin tác giả:: Li,Ye

Surfactant transport onto a foam ﬁlm in the presence of surface viscous stress
Thông tin tác giả:: Vitasari,Denny

Inﬂuence of the mechanical activation of raw mixes on the properties of foam glass from sand sludge
Thông tin tác giả:: Volland,Svetlana

The ratio of metabolically active versus total Mycolata populations triggers foaming in a membrane bioreactor
Thông tin tác giả:: Marquez,P. Maza-

Effects of expanded polystyrene (EPS) particles on ﬁre resistance, thermal conductivity and compressive strength of foamed concrete
Thông tin tác giả:: Sayadi,Ali A.

Development of a tool to assess in-situ curing of Foamed Bitumen Mixtures
Thông tin tác giả:: Kuna,Kranthi

Numerical evaluation of the stacking effect of spheres on the mechanics of tailor-made aluminum foams Mohammad Javad Nayyeri, Seyyed Mohammad Hossein Mirbagheri ⇑ , Davoud Haghshenas Fatmehsari
Thông tin tác giả:: Mirbagheri

Accurate and robust measurement of the external convective heat transfer coefﬁcient based on error analysis
Thông tin tác giả:: E.Anders,K. Ohlsson

Preparation of high strength glass ceramic foams from waste cathode ray tube and germanium tailings
Thông tin tác giả:: Zhang,Qiuping

Mechanical properties of high porosity cement-based foam materials modiﬁed by EVA
Thông tin tác giả:: Sang,Guochen

A study of secondary heat recovery efﬁciency of a heat pipe heat exchanger air conditioning system
Thông tin tác giả:: Wang,Haitao

Study of a prototype of an advanced mechanical ventilation system with heat recovery integrated by heat pump
Thông tin tác giả:: Fucci,F.

Ventilation heat recovery jointed low-temperature heating in retroﬁtting—An investigation of energy conservation, environmental impacts and indoor air quality in Swedish multifamily houses
Thông tin tác giả:: Wang,Qian

An experimental analysis of the impact of temperature on falling ﬁlm drain water heat recovery system effectiveness
Thông tin tác giả:: Manouchehri,Ramin

Structural behavior of axially loaded precast foamed concrete sandwich panels
Thông tin tác giả:: Amran,Y.H. Mugahed

Extreme learning machine for prediction of heat load in district heating systems
Thông tin tác giả:: Sajjadi,Shahin

Integration of space heating and hot water supply in low temperature district heating
Thông tin tác giả:: Elmegaard,Brian

X-ray microtomography and ﬁnite element modelling of compressive failure mechanism in cenosphere epoxy syntactic foams /Ruoxuan Huang a , Peifeng Li a, ⇑ , Tong Liu b
Thông tin tác giả:: Huang,Ruoxuan

Foaming of oxidized nanocellulose for the preparation of high-flux water filters
Thông tin tác giả:: Marta, Fortea-Verdejo, và những người khác
Thông tin xuất bản: (2023)

Prediction of surface temperatures for the assessment of urban heat island effect over Ahmedabad city using linear time series model
Thông tin tác giả:: Mathew,Aneesh

Protective effect of graded density aluminium foam on RC slab under blast loading – An experimental study
Thông tin tác giả:: Xia,Ye

Experimental investigations of polymer hollow ﬁbre heat exchangers for building heat recovery application
Thông tin tác giả:: Chen,Xiangjie

Improving the Estimation of Hydraulic and Thermal Properties of Heterogeneous Media via the Addition of Heat Loss
Thông tin tác giả:: Pan, M.
Thông tin xuất bản: (2020)

Theoretical overview of heating power and necessary heating supply temperatures in typical Danish single-family houses from the 1900s
Thông tin tác giả:: Østergaard,Dorte Skaarup

Evaluating the inﬂuence of wastewater composition on the growth of Microthrix parvicella by GCxGC/qMS and real-time PCR
Thông tin tác giả:: Dunkel,Thiemo

The application of energy balance at the bare soil surface to predict annual soil temperature distribution
Thông tin tác giả:: Staniec,Maja

Flammability, mechanical properties and structure of rigid polyurethane foams with different types of carbon reinforcing materials /E. Ciecierska a, ⇑ , M. Jurczyk-Kowalska a , P. Bazarnik a , M. Gloc a , M. Kulesza a , M. Kowalski b , S. Krauze b , M. Lewandowska a
Thông tin tác giả:: Ciecierska,E.

Case study of low-temperature heating in an existing single-family house—A test of methods for simulation of heating system temperatures : Østergaard,Dorte Skaarup

Quasi-static axial crushing experiment study of foam-ﬁlled CFRP and aluminum alloy thin-walled structures /Nianfei Gan a,b , Yanan Feng a , Hanfeng Yin a,b , Guilin Wen a,b, ⇑ , Duohua Wang a , Xinyi Huang a
Thông tin tác giả:: Gan,Nianfei

Compressive behaviour of unconstrained and constrained integral-skin closed-cell aluminium foam /Isabel Duarte a, ⇑ , Matej Vesenjak b , Lovre Krstulovic´-Opara c
Thông tin tác giả:: Duarte,Isabel

Evaluation of the health-risk reduction potential of countermeasures to urban heat islands
Thông tin tác giả:: Buchin,Oliver

Indoor temperatures for calculating room heat loss and heating capacity of radiant heating systems combined with mechanical ventilation systems
Thông tin tác giả:: Wu,Xiaozhou

Analysis of performance of in-situ carbon steel bar reinforced Al-alloy foams /Isabel Duarte a, ⇑ , Lovre Krstulovic´-Opara b , Matej Vesenjak c
Thông tin tác giả:: Duarte,Isabel