Application of glass fibre-reinforced high strength selfcompacting mortar for rehabilitating marine structures

Application of glass fibre-reinforced high strength selfcompacting mortar for rehabilitating marine structures

Maintenance and rehabilitation of marine structure is currently indispensable in Vietnam to prolong the service life instead of re-building with a very high cost that cannot be done in the short term. This paper focuses on the rehabilitation work of a beam structure by using glass fiber-reinforced h...

Mô tả chi tiết

Lưu vào:

Hiển thị chi tiết
Tác giả chính:	Nguyen, Viet Duc
Định dạng:	BB
Ngôn ngữ:	English
Thông tin xuất bản:	2021
Chủ đề:	Rehabilitation Marine structure Alkali-resistant glass fiber High strength selfcompacting mortar
Truy cập trực tuyến:	http://tailieuso.tlu.edu.vn/handle/DHTL/10902
Từ khóa:	Thêm từ khóa bạn đọc Không có từ khóa, Hãy là người đầu tiên gắn từ khóa cho biểu ghi này!

Tài liệu tương tự

Comparative study on the surface treatment for marine structure rehabilitation with glass Fiber-Reinforced high strength Self-Compacting mortar
Thông tin tác giả:: Nguyen, Viet Duc
Thông tin xuất bản: (2023)

Comparative study on the surface treatment for marine structure rehabilitation with glass Fiber-Reinforced high strength Self-Compacting mortar
Thông tin tác giả:: Nguyen, Viet Duc
Thông tin xuất bản: (2023)

Effect of glass fiber length on the properties of high strength self-compacting mortar
Thông tin tác giả:: Nguyen, Viet Duc
Thông tin xuất bản: (2020)

Study on the use of different glass fiber contents for self-compacting mortar
Thông tin tác giả:: Nguyen, Thi Thu Huong
Thông tin xuất bản: (2021)

The manufacturing technology of continuous glass fibres / K. L. Loewenstein.
Thông tin tác giả:: Loewenstein, K. L.(Klaus Leopold),1923-

Effect of mould type on flexural strength of selfcompacting steel fibre-reinforced concrete
Thông tin tác giả:: Nguyen, Viet Duc
Thông tin xuất bản: (2020)

Homogeneous and heterogeneous rheology and ﬂow-induced microstructures of a fresh ﬁber-reinforced mortar / F. Chalencon... [et al.]
Thông tin tác giả:: Chalencon, F., và những người khác

Transient dynamic behavior of polypropylene ﬁber reinforced mortar under compressive impact loading
Thông tin tác giả:: Zhang,Hua

Chemical Resistance and Mechanical Properties of Glass Fiber – Reinforced Plastic Pipes for Oil, Gas, and Power-Plant Applications
Thông tin tác giả:: Hadhrami,L. M. Al-

Research on the use of glass fiber reinforcement to produce high performance concrete applied for coastal protection structures
Thông tin tác giả:: Nguyen, Thi Thu Huong
Thông tin xuất bản: (2022)

Using isothermal calorimetry to predict one day mortar strengths / Lasse Frølich, Lars Wadsö, Paul Sandberg
Thông tin tác giả:: Frølich, Lasse, và những người khác

Material properties and partial factors for resistance of high-strength steels in China /Gang Shi a, ⁎ , Xi Zhu b , Huiyong Ban
Thông tin tác giả:: Shi,Gang

A study of the engineering properties of alkali-activated waste glass material (AAWGM)
Thông tin tác giả:: Wang,Wei-Chien

Experimental and numerical research on the potentialities of layered reinforcement conﬁguration of continuous sisal ﬁbers for thin mortar panels
Thông tin tác giả:: Barros,Joaquim A.O.

The effect of aggregates with high gypsum content on the performance of ultra-high strength concretes and Portland cement mortars
Thông tin tác giả:: Gesoglu,Mehmet

Evaluation of applicability of thick E500 TMCP and F500W QT steel plates for Arctic service /Pavel Layus 1* , Paul Kah 1 , Vladislav Ryabov 2 and Jukka Martikainen 1
Thông tin tác giả:: Layus,Pavel

Shear strengthening of unreinforced masonry wall with different ﬁber reinforced mortar jacketing
Thông tin tác giả:: Yardim,Yavuz

Possibility of using recycled waste medical-glass as fine aggregate in normal-strength concrete
Thông tin tác giả:: Huynh Thi My Dung

Composite properties of high-strength polyethylene ﬁber-reinforced cement and cementless composites /Jeong-Il Choi, Keum-Il Song, Jin-Kyu Song, Bang Yeon Lee
Thông tin tác giả:: Choi,Jeong-Il

Performance of deformed steel ﬁbers embedded in ultra-high performance concrete subjected to various pullout rates / Yuh-Shiou Tai, Sherif El-Tawil,Ta-Hsiang Chung
Thông tin tác giả:: Tai, Yuh-Shiou, và những người khác

Study on a high strength ternary binder cured under different conditions
Thông tin tác giả:: Li,Guoxin

Seismic performance of MRFs with high strength steel main frames and EDBs /Ke Ke, Yiyi Chen ⁎
Thông tin tác giả:: Ke,Ke

The inﬂuence of elevated temperature on strength and microstructure of high strength concrete containing ground pumice and metakaolin
Thông tin tác giả:: Saridemir,M.

Relationship between tensile Young’s modulus and strength of ﬂy ash high strength concrete at early age
Thông tin tác giả:: Shen,Dejian

Modelling of the compressive strength development of cement mortar with furnace slag and desulfurization slag from the early strength
Thông tin tác giả:: Wang,Chien-Chih

Mechanical behavior of functionally-Graded concrete beam under flexural loading
Thông tin tác giả:: Nguyen Viet Duc
Thông tin xuất bản: (2024)

Flexural tensile strength in mortar coating reinforced with different types of metal mesh: A statistical comparison
Thông tin tác giả:: Antunes,Giselle R.

Bond behaviour between recycled aggregate concrete and glass ﬁbre reinforced polymer bars
Thông tin tác giả:: Baena,M.

Damage-Plasticity Model for FRP-Confined Normal-Strength and High-Strength Concrete
Thông tin tác giả:: Ozbakkaloglu,Togay

Fatigue Behavior of Cracked High-Strength Steel Plates Strengthened by CFRP Sheets
Thông tin tác giả:: Hu,Li Li

Flexural behavior of high-strength concrete beams reinforced with a strain hardening cement-based composite layer
Thông tin tác giả:: Khan,M. Iqbal

Experimental investigation of the compressive and tensile strengths of geopolymer mortar: The effect of sand/ﬂy ash (S/FA) ratio
Thông tin tác giả:: Ph.D,Ernesto J. Guades

Glass fiber-reinforced composites in dentistry
Thông tin tác giả:: Safwat, Engie M.
Thông tin xuất bản: (2023)

Experimental behavior and design method of rectangular concrete-ﬁlled tubular columns using Q460 high-strength steel
Thông tin tác giả:: Du,Yansheng

Evaluation of the ﬁll yarns effect on the out-of-plane compressive fatigue behavior for an unidirectional glass ﬁber reinforced epoxy composite /Víctor San Juan a , Eduardo Fernández a , Gonzalo Pincheira b , Manuel Meléndrez b , Paulo Flores
Thông tin tác giả:: Juan,Víctor San

Experimental study of early-age bond behavior between high strength concrete and steel bars using a pull-out test
Thông tin tác giả:: Shen,Dejian

New calibration of partial material factors for the structural design of ﬂoat glass. Comparison of bounded and unbounded statistics for glass strength
Thông tin tác giả:: Ballarini,Roberto

Constitutive model for conﬁned ultra-high strength concrete in steel tube
Thông tin tác giả:: Wang,Yan-Bo

Constitutive model for conﬁned ultra-high strength concrete in steel tube
Thông tin tác giả:: Wang,Yan-Bo

Comparison of Strength–Maturity Models Accounting for Hydration Heat in Massive Walls
Thông tin tác giả:: Yang,Keun-Hyeok, và những người khác